4.2.4 Alert Trap
This section provides Web Smart PoE Switch Alert Trap configuration, such as Disable or enable the trap mode and alert
IP address assign the screen in
Switch.
Object
Trap mode
Alert IP Address
Trap Event
Cold start
Login Fail
Password Changed
IP Changed
PoE Alert
Link Up
Link Down
Apply
Figure 4-8
appears. The
Figure 4-8 Alert Trap Web Page Screen
Allow disable or enable the Alert Trap mode.
Allow assign an Alert IP Address of one specific workstation that gets SNMP Trap.
Choose this event then can get Cold Start Trap.
Choose this event then can get Login Fail Trap.
Choose this event then can get Password Changed Trap.
Choose this event then can get IP address Changed Trap.
Choose this event then can get link up / link down Trap from each PoE port.
Choose this event then can get link up trap from each Ethernet port.
Choose this event then can get link down trap from each Ethernet port.
Press this button to take affect.
Table 4-2 Descriptions of the Alert Trap Web Page Screen Objects
table 4-2
describes the Alert Trap object of Web Smart PoE
Description
- 20 -