4-2 System
This section provides System Information, IP Configuration, Password Setting, Alert Trap, Factory Default, Firmware
Update and Reboot functions of Web Smart PoE Switch, the screen in
System object of Web Smart PoE Switch.
Object
System Information Display the MAC address, Hardware Version, and Software Version, Device Description.
IP Configuration
Password Setting
Alert Trap
Factory Default
Firmware Update
Reboot
Figure 4-3 System Web Page Screen
plained in section 4.2.1.
Allow to change the IP subnet address of Web Smart PoE Switch.
Allow to change the username and password of Web Smart PoE Switch.
4.2.3.
Allow configure the Alert Trap function of Web Smart PoE Switch.
Allow reset the Web Smart PoE Switch to factory default mode.
Allow proceed firmware upgrade process of Web Smart PoE Switch.
4.2.6.
Allow reboot the Web Smart PoE Switch.
Table 4-1 Descriptions of the System Web Page Screen Objects
Figure 4-3
appears and
Description
Explained in section 4.2.7.
table 4-1
describes the
Ex-
Explained in section 4.2.2.
Explained in section
Explained in section 4.2.4.
Explained in section 4.2.5.
Explained in section
- 16 -