Ac Or Dc Current Measurements - Fluke 3000 FC Manual

AC or DC Current Measurements

 Warning
To prevent possible electrical shock, fire, or
personal injury:
•
Remove circuit power before you
connect the Product in the circuit when
you measure current. Connect the
Product in series with the circuit.
•
Limit operation to the specified
measurement category, voltage, or
amperage ratings.
 Caution
To prevent possible damage to the Product
or the equipment under test:
•
Do a fuse test before current
measurements. See "Fuse Test".
•
Use the correct terminals, function, and
range for all measurements.
•
Do not put the probes across (in parallel
with) a circuit or component when the
test leads are connected to the current
terminals.
Turn off circuit power, break the circuit, put the Product in
series, and then turn on circuit power.
The current ranges are 60.00 mA and 400.0 mA. Set the
Product as shown in Figure 6 to measure ac and dc
current. Push to toggle the Product between
milliamps ac and milliamps dc.
Wireless Multimeter
Basic Measurements
23