•
Replace the batteries when the low
battery indicator shows to prevent
incorrect measurements.
•
The battery door must be closed and
locked before you operate the Product.
•
Do not use the Product if it operates
incorrectly.
•
Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
•
Use only correct measurement category
(CAT), voltage, and amperage rated
probes, test leads, and adapters for the
measurement.
•
Do not use test leads if they are
damaged. Examine the test leads for
damaged insulation, exposed metal, or if
the wear indicator shows. Check test
lead continuity.
•
Keep fingers behind the finger guards on
the probes.
•
Do not touch the probes to a voltage
source when the test leads are
connected to the current terminals.
•
Connect the common test lead before
the live test lead and remove the live test
lead before the common test lead.
•
Remove all probes, test leads, and
accessories that are not necessary for
the measurement.
Wireless Multimeter
Safety Information
3