Table of Contents
Advertisement
Channel 1-11 (North America)
You may press "Show Active Clients" button to check the connected client
information. After the button pressed, you will see the dialog box as below.
Associated Client
You may press "Refresh" to get the new client table or "Close" to close this dialog
box.
If you want to bridge more than two wired Ethernet networks together with wireless
MAC Address 1-4
connection, you have to enter the MAC addresses of otherWNRT-620s that with
join the bridging work into the fields.
IF you want to enable security to protect your wireless connection. Please press
Set Security
"Set Security" button and refer to section 6.7 "Security setting for bridge mode" to
configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
- 75 -
Advertisement
Table of Contents
