Table of Contents
Advertisement
WLAN MAC
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
You may press "Refresh" to get the new Access Point and select one of
them to click "Done" to connect.
Keep default setting: WRT-620 will use it's own MAC address to access
the wireless LAN.
Press "MAC Clone" button: It will use PC's MAC address to access the
wireless LAN.
- 70 -
Advertisement
Table of Contents
