Table of Contents
Advertisement
Parameters
Description
Check "Enable MAC Filtering" to enable MAC Filtering.
If select "Deny", all PCs will be allowed to access Internet accept for the PCs
Enable MAC Filtering
in the list below.
If select "Allow", all PCs will be denied to access Internet accept for the PCs
in the list below.
Fill in "Client PC MAC Address" and "Comment" of the PC that is allowed to
Add PC
access the Internet, and then click "Add". If you find any typo before adding it
and want to retype again, just click "Reset" and the fields will be cleared.
If you want to remove some PC from the "MAC Filtering Table", select the
PC you want to remove in the table and then click "Delete Selected". If you
Remove PC
want remove all PCs from the table, just click "Delete All" button. If you want
to clear the selection and re-select again, just click "Reset".
Check "Enable IP Filtering Table" to enable IP filter.
If select "Deny", all PCs will be allowed to access Internet accept for the PCs
in the list below.
Enable IP Filtering Table
If select "Allow", all PCs will be denied to access Internet accept for the PCs
in the list below.
You can click "Add PC" to add an access control rule for users by IP
Add PC
addresses. Please refer to section 5.7.1.1.
If you want to remove some PCs from the "IP Filtering Table", select
Remove PC
the PC you want to remove in the table and then click "Delete
Selected".
- 59 -
Advertisement
Table of Contents
