Table of Contents
Advertisement
5.5
QoS
Quality of Service (QoS) refers to the capability of providing better service to selected network traffic. The
primary goal of QoS is to provide priority including dedicated bandwidth, controlled jitter and latency
(required by some real-time and interactive traffic), and improved loss characteristics. When using this
feature, it is important to make sure the rules are not conflicted with each other.
Parameters
Description
Check this box to enable QoS function, unselect this box if you don't want to
Enable QoS
enforce QoS bandwidth limitations.
You can set the limit of total download bandwidth in kbits. To disable
Total Download Bandwidth
download bandwidth limitation.
You can set the limit of total upload bandwidth in kbits. To disable upload
Total Upload Bandwidth
bandwidth limitation.
When you want to add a new QoS rule, press this button and refer to section
Add
5.5.1 to add a new QoS rule.
When you want to edit the existing QoS rule, press this button and refer to
Edit
section 5.5.1 to edit QoS rule.
Select the QoS rule which you would like to delete , then press this button to
Delete Selected
delete.
When you want to delete all the QoS rules, you just need to press this
Delete All
button.
Move Up
Select a QoS rule and press this button to assign higher priority.
Remove Down
Select a QoS rule and press this button to assign lower priority.
- 46 -
Advertisement
Table of Contents
