Planet WNRT-620 User Manual page 49

5.4.5 WPS
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients
and this wireless router. You don't have to select encryption mode and input a long encryption pass
phrase every time when you need to setup a wireless client, you only have to press a button on wireless
client and this wireless router, and the WPS will do the rest for you.
This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN code. If you
want to use PBC, you have to push a specific button on the wireless client to start WPS mode, and switch
this wireless router to WPS mode too. You can push RET/WPS button of this wireless router, or click
'Start PBC' button in the web configuration interface to do this; if you want to use PIN code, you have to
know the PIN code of wireless client and switch it to WPS mode, then provide the PIN code of the
wireless client you wish to connect to this wireless router.
Parameters Description
Enable WPS Check this box to enable WPS function, uncheck it to disable WPS.
Wi-Fi Protected
WPS-related system information will be displayed here.
Setup Information
If the wireless security (encryption) function of this wireless router is properly set,
WPS Status you'll see 'Configured' message here. If wireless security function has not been set,
you'll see 'unConfigured'.
This is the WPS PIN code of this wireless router. This code is useful when you need
Self PIN code
to build wireless connection by WPS with other WPS-enabled wireless devices.
SSID The SSID of this wireless router will be displayed here.
Authentication The wireless security authentication mode of this wireless router will be displayed
- 44 -