Url Blocking - Planet WNRT-620 User Manual

Please input any text to describe this IP address, up to 16 alphanumerical
Client PC Description
characters.
Please input the starting IP address in the left field, and input the end IP
address in the right field to define a range of IP addresses, or just input the
Client PC IP Addresses IP address in the left field to define a single IP address.
Note: You need to give your LAN PC clients a fixed/static IP address for the
Access Control rule to work properly.
You can block the clients from accessing some Internet services by checking
Client PC Service
the services you want to block.
Protocol This allows you to select UDP, TCP or Both protocol types.
You can assign up to five port ranges. The router will block clients from
Port Range
accessing Internet services that use these ports.
Add Click "Add" to save the settings.
Reset Click "Reset" to clear all fields.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.7.2

URL Blocking

You can block users to access to some web sites by entering a full URL address or just keyword of the
web site.
Parameters Description
Enable URL Blocking Enable/disable URL Blocking.
- 61 -