Url Blocking - Planet XRT-401D User Manual

Client PC Service
Protocol
Port Range
Apply Changes
Reset
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can
now configure other advance sections or start using the router (with the advance settings in place)

3.5.2 URL Blocking

You can block access to some Web sites from particular PCs by entering a full URL address or
just keyword of the Web site.
Parameters
Enable URL Blocking
appropriate boxes. If you want to select only one user
then input the user's IP address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
You can block the clients from accessing some Internet
services by checking the services you want to block.
This allows you to select UDP, TCP or both protocol type
you want to block.
You can assign up to five port ranges. The router will
block clients from accessing Internet services that use
these ports.
Click "Apply Changes" to save the setting.
Click "Reset" to clear all fields.
Description
Enable/disable URL Blocking
48