Net Set Dhcp Server; Configuring Tftp Server; Net Set Tftpsrv - Planet VIP-110 Command Reference Manual

net set dhcp server

The ITG supports DHCP server over its LAN interface, allowing hosts in the LAN interface to
dynamically obtain IP configuration from the ITG.
The net set dhcp server command allows you to configure the DHCP server.
net set dhcp server no_of_client base_address
Syntax description
no_of_client
base_addr
Factory default
Number of DHCP clients is 0

Configuring TFTP Server

The ITG implements a TFTP server over its WAN and LAN interfaces which allows the export of
system configuration parameters and dial plan to other ITGs or IP hosts. The TFTP server
maintains the following file on its root directory:
File Name
dialplan.ITG
config.ITG
If the TFTP server is enabled, other ITGs can import the above files using the built-in TFTP
client software. IP hosts with TFTP client software may download these files too. This section
described command for configuring the TFTP server.

net set tftpsrv

This command is used to enable of disable the built-in TFTP server.
net set tftpsrv {on | off}
Syntax description
on
off
Factory default
off
IP Configuration Commands
MAC address of the WAN interface.
Number of DHCP clients the ITG would support over the LAN
interface.
Starting address of the DHCP clients
Description
Dial plan
System configuration parameters
Enable TFTP server
Disable TFTP server
11