Table of Contents
Advertisement
O P E R A T I N G Y O U R V E H I C L E
PARKSENSE
ParkSense Front And Rear Park Assist
ParkSense can be enabled and disabled by pushing the ParkSense switch located on the switch
panel below the Uconnect display.
The six ParkSense sensors, located in the rear
fascia/bumper, monitor the area behind the
vehicle that is within the sensors' field of view.
The sensors can detect obstacles from approxi-
mately 12 inches (30 cm) up to 79 inches
(200 cm) from the rear fascia/bumper in the
horizontal direction, depending on the loca-
tion, type and orientation of the obstacle.
The six ParkSense sensors, located in the front
fascia/bumper, monitor the area in front of the
vehicle that is within the sensors' field of view.
The sensors can detect obstacles from approxi-
mately 12 inches (30 cm) up to 47 inches
(120 cm) from the front fascia/bumper in the
ParkSense Switch
horizontal direction, depending on the loca-
tion, type and orientation of the obstacle.
When an object is detected within 79 inches (200 cm) behind the rear bumper while the vehicle
is in REVERSE, a warning will display in the instrument cluster display. In addition a chime will
sound (when Sound and Display is selected from the Customer Programmable Features screen
of the Uconnect System). As the vehicle moves closer to the object, the chime rate will change
from single 1/2 second tone (for rear only), to slow (for rear only), to fast, to continuous.
Refer to your Owner's Manual on www.chrysler.com/en/owners/manuals for further information.
85
Advertisement
Table of Contents
