Table of Contents
Advertisement
O P E R A T I N G Y O U R V E H I C L E
WIPER/WASHER LEVER
Wiper/Washer Lever
1 — Mist (Lift Up)
2 — Wiper Operation (Rotate)
3 — Washer (Pull Toward Driver)
Front Wipers
Intermittent, Low And High Operation
Rotate the end of the lever to one of the first four detent positions for intermittent settings, the
fifth detent for low wiper operation and the sixth detent for high wiper operation.
Washer Operation
Pull the lever rearward toward you and hold for as long as spray is desired.
Mist
Push the lever upward to the Mist position and release for a single wiping cycle.
NOTE:
The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on
the windshield. The washer function must be activated in order to spray the windshield with
washer fluid.
Rain Sensing Wipers
This feature can be activated/deactivated using the Uconnect system. Refer to the "Uconnect
Settings" in "Understanding Your Instrument Panel" in the Owner's Manual on
www.chrysler.com/en/owners/manuals for further details.
This feature senses moisture on the vehicles windshield and automatically activates the wipers for
the driver when the switch is in the intermittent position.
Rotate the end of the lever to one of four settings to activate this feature and adjust sensitivity.
64
Advertisement
Table of Contents
