Table of Contents
Advertisement
O P E R A T I N G Y O U R V E H I C L E
Metric Speed (km/h)
• Pushing the SET + button once will result in a 1 km/h increase in set speed. Each subsequent
tap of the button results in an increase of 1 km/h.
• If the button is continually pushed, the set speed will continue to increase until the button is
released, then the new set speed will be established.
To Decrease Speed
• When the Speed Control is set, you can decrease speed by pushing the SET - button.
The drivers preferred units can be selected through the instrument panel settings if equipped.
Refer to "Understanding Your Instrument Panel" in the Owner's Manual on
www.chrysler.com/en/owners/manuals for more information. The speed increment shown is
dependant on the speed of U.S. (mph) or Metric (km/h) units:
U.S. Speed (mph)
• Pushing the SET - button once will result in a 1 mph decrease in set speed. Each subsequent
tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed will continue to decrease until the button is
released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET - button once will result in a 1 km/h decrease in set speed. Each subsequent
tap of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed will continue to decrease until the button is
released, then the new set speed will be established.
Resume
To resume a previously selected set speed in memory, push the RES button and release.
Cancel
• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the set
speed memory.
• Push the on/off button to turn the system off and erase the set speed memory.
Leaving the Speed Control system on when not in use is dangerous. You could accidentally set
the system or cause it to go faster than you want. You could lose control and have an accident.
Always leave the system off when you are not using it.
66
WARNING!
Advertisement
Table of Contents
