Chapter 2 Installation; System Requirements; Installation Procedure - Planet ADW-4100 User Manual

Chapter 2
Installation
This Chapter covers the physical installation of ADW-4100.

System Requirements

PC or TCP/IP compliant workstations
32 MB RAM
Ethernet Network Interface Controller (NIC) RJ45 Port
Internet Browser

Installation Procedure

Step 1
Choose an Installation Site
Select a suitable place on the network to install ADW-4100. Ensure ADW-4100 is
powered OFF.
Step 2
Connect LAN Cables
Use standard LAN cables to connect PCs to the LAN port on ADW-4100. Either
10BaseT or 100BaseT connections can be used.
Step 3
Connect WAN Cable
Connect one end of the RJ-11 phone cord to the LINE port on your ADSL modem.
Connect the other end of the RJ-11 phone cord to your wall phone jack.
Step 4
Power Up
Figure 2-1: Installation Diagram
2
5