Wireless Configuration - Planet ADW-4100 User Manual

ADW-4100 User Manual
packets will be forwarded to the destination PC.
Destination MAC
When the bridge filtering is enabled, enter the Destination MAC address, select
Block and click Add. Then all incoming WAN and LAN Ethernet packets matched
with this destination MAC address will be filtered out. If the Forward is selected,
then the packets will be forwarded to the destination PC.
Type
Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets.
For example, 0800 is for IP protocol.
Figure 4-22: Bridge Filtering Screen

Wireless Configuration

This page allows user to configure the wireless settings of ADW-4100.
Figure 4-23: Wireless Configuration Screen
SSID
The SSID is the name shared among all points in the wireless network system,
must be identical for all points.
Channel
28