Viessmann VITOCROSSAL 200 Instructions Manual page 5

Steps - commissioning, inspection and maintenance
For further information regarding the individual steps, see the page indicated
•
•
•
• • •
•
•
• • •
• • •
• • •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
Commissioning steps
Inspection steps
Maintenance steps
1. Checking the high limit safety cut-out setting.............
2. Filling the heating system with water and venting the
system.............................................................................
3. Filling siphon with water................................................
4. Starting the heating system...........................................
5. Checking the gas type....................................................
6. Conversion to natural gas LL........................................
7. Checking the static and the supply pressure.............. 12
8. Checking the CO
9. Checking the CO content
10. Checking the flue gas temperature
11. Checking the ionisation current.................................... 19
12. Shutting down the system............................................. 20
13. Opening the boiler door................................................. 20
14. Separating the neutralising system (if installed) from
the boiler and connecting the drain hose.................... 20
15. Cleaning the combustion chamber and heating
surfaces........................................................................... 20
16. Checking gaskets and thermal insulation
components.................................................................... 21
17. Checking all heating water connections and the
sensor well for leaks...................................................... 22
18. Cleaning and reconnecting the condensate drain
system............................................................................. 22
19. Checking the condensate drain and the neutralising
system (if installed)........................................................ 23
20. Checking the burner gauze assembly.......................... 24
Commissioning, inspection, maintenance
content............................................. 14
2
Page
7
7
7
7
9
9
5