Planet VoIP Analog Telephone Adapter VIP-157S User Manual page 14

#112xxx*xxx*xxx*
xxx#
#113xxx*xxx*xxx*
xxx#
#114xxx*xxx*xxx*
xxx#
#115xxx*xxx*xxx*
xxx#
#190#
#191#
#195#
#198#
0＊
Following keypad commands can be used to display the network settings enabled on ATA via voice
prompt.
IVR Menu Choice
#120#
#121#
#122#
#123#
#124#
Setup Static IP Address
Set Network Mask
Set Gateway IP Address
Set Primary DNS Server
Unlock
Lock
Reboot
Factory Reset
To switch PSTN mode
Machine operation
Check PC IP Address
Check network connection Type
Check the Phone Number
Check Network Mask
Check Gateway IP Address
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
None
None
None
None
None
IVR will announce the current PC-port IP
address of the ATA.
IVR will announce if DHCP in enabled or
disabled.
IVR will announce current enabled VoIP
number.
IVR will announce the current network mask
of the ATA.
IVR will announce the current gateway IP
Client
DHCP will be disabled and
system will change to the
Static IP type.
Must set Static IP first.
Must set Static IP first.
Must set Static IP first.
Must unlock the protect
function before set up
network settings and ATA
function via keypad.
The system will be lock
and can't set up network
settings via keypad.
The system will reboot
automatically.
The system will be reset to
factory default value and
reboot automatically.
VIP-157 only
Notes:
14