Power Supply And Low Battery - marsden M-560 User Manual

Power Supply & Low Battery
The indicator uses a rechargeable battery pack, or can be powered from the mains via the AC adaptor.
Make sure the battery pack is installed in the battery box of the indicator. Alternatively, plug the AC
adaptor (12V 2A) into the port on the side of the indicator.
Installing & Replacing the Battery Pack
1. Take out the battery housing.
2. The rechargeable battery pack will slide into, or out of, the housing.
3. Check that the housing pin is connecting to the right point inside the indicator.
4. Place the housing back in the back of the indicator, and close the battery housing cover.
Optional battery
holder (to fit AA sized
batteries – contact
your dealer)
Page 6