Appendix: Troubleshooting - TP-Link Archer VR600v User Manual

Appendix: Troubleshooting

T1. How do I restore my modem router's configuration to its factory
default settings?
With the modem router powered on, press and hold down the Reset button on the side
panel of the modem router for 10 seconds until all LEDs turn on momentarily, then
release the button.
Note: Once the modem router is reset, the current configuration settings will be lost and you will need to re-configure
the modem router.
T2. What can I do if I forgot my password?
Web management page password:
• If you are using a TP-Link ID to log in, click Forgot password on the login page and
then follow the instructions to reset the password.
• Alternatively, refer to T1 to reset the router, and then visit http://tplinkmodem.net to
create a new login password.
Wireless network password:
1. The default Wireless Password/PIN is printed on the product label of the modem
router.
2. If the default wireless password has been changed, log in to the modem router's web
management page and go to
T3. What can I do if I cannot log in to the modem router's web management
page?
• Make sure the modem router connects to the computer correctly and the
corresponding LED indicator(s) light up.
• Make sure the IP address of your computer is configured to obtain an IP address
automatically and obtain DNS server address automatically.
• Make sure the default access you input is right.
• Check your computer's settings:
1 ) Go to Start
status and tasks;
2 ) Click Internet Options
3 ) Click Connections, select
Basic >
> Control Panel > Network and
on the bottom left;
Never dial a
Wireless to retrieve or reset your password.
Internet, and click
connection;
View network
129