Change The Administrator Account; Local Management - TP-Link Archer VR600v User Manual

Chapter 15
3. Click Restore to restore all configuration settings to default values, except your
login and TP-Link ID information. Click
4. Wait for the resetting and then the modem router will automatically reboot.
Note:
1. During the resetting process, do not turn off the modem router.
2. We strongly recommend you back up the current configuration settings before resetting the modem router.

15. 5. Change the Administrator Account

Admin account is used to log in to the modem router's web management page. You are
required to set the admin account at first login. You can also change it on the web page.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
Management section.
3. Enter the old password. Enter the new password and enter again to confirm.
4. Click Save to make the settings effective.

15. 6. Local Management

You can control the local devices' authority to manage the modem router via Local
Management feature. By default all local connected devices are allowed to manage the
modem router. You can also allow only one device to manage the modem router and
enable local management over a more secure way, HTTPS.
Follow the steps below to allow only the specific device to manage the router via the
local management over HTTPS.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
Factory Restore
> System Tools> Administration
Administrate Your Network
to reset the modem router.
page. Locate the Account
120