Configure The Radvd Address Type; Configure The Dhcpv6 Server Address Type - TP-Link Archer VR600v User Manual

Chapter 14

14. 2. 1. Configure the RADVD Address Type

1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Select IPv6 to configure IPv6 LAN parameters.
1 ) Select the RADVD
prefixes to hosts.
Note:
Do not select the
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact
our technical support.
2 ) Keep Site Prefix Type
specific IPv6 site prefix, select
3 ) Keep Prefix Delegated WAN Connection
4. Click Save to make the settings effective.

14. 2. 2. Configure the DHCPv6 Server Address Type

1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Select IPv6 to configure IPv6 LAN parameters.
> Network > LAN Settings.
address type to make the modem router assign IPv6 address
Enable RDNSS and Enable ULA Prefix
as the default value Delegated. If your ISP has provided a
Static
> Network > LAN Settings.
Specify Your Network Settings
check boxes unless required by your ISP. Otherwise
and enter the prefix.
as the default value.
100