Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Tools Required for Assembly
1. Handle Installation
1
Attach the handle to the mounting hole on the
outside of the door.
2. Leg Assembly
1
Align the mounting tab into
the base.
CARE AND MAINTENANCE
• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
• DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based
products can be obtained at supermarkets or hardware stores.
• WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electrical shock and injury to persons.
• Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical
shock or personal injury.
A611
Insert the screw (0.16 in. x 0.4 in.) from inside of
door and tighten the screw until the handle can not
be turned.
2
Slide the leg downward to lock
in place. When locked in position
the screw holes from step 3 will be
aligned.
4
Phillips Head Screwdriver
2
3
Fasten the leg to the base using the
included screws, 3 per leg.
www.tsicustomerservice.com
Hide quick links:
Advertisement
Table of Contents
