®
5.3
Wi-Fi
Direct Mode
• Run Hubble for Motorola Petcam App on your smart device and log into your
Hubble account.
• If you have more than 1 Pet Camera in your account: For iOS Devices, tap
Devices
to select a camera from the camera list For
TM
Android
Devices, tap
camera list
• Tap on Settings icon
to enter Camera Settings.
• Tap Wifi Direct Mode to connect to your Pet Camera via Wi-Fi
about 1 minute to establish a connection and you will hear a voice prompt
notifying you that the connection has been established.
• Tap View Camera at the bottom of the screen and then tap on the video image
to show the options available.
• Tap EXIT WIFI DIRECT and then tap OK to exit Wi-Fi
Tap to take a photo
Take Photo/
your Pet Camera or activate night vision
Record Video/
(the white LED light on the Pet Camera will
Activate Night
light up).
Vision
26
> Cameras
to select a camera from the
®
Direct. It takes
®
Direct mode.
, record a video from
Overview of the features in Hubble App
Tap
Location
Your pet's location is identified by a blue dot.
Tracking and
Note that location tracking will be based on the
Geo Fencing
mobile network first (with a tolerance of around
0.6miles), then by GPS satellite (with a
tolerance of around 30 feet).
Tap
Tap on the round button
Two-way
through the Pet Camera. Toggle the button
communication
again to listen to the audio feedback from the
and Send
Pet Camera.
Reward/
Tap to send a pre-recorded reward
warning
Warning
Pet Camera.
Messages
Tap to enter photo or video gallery where you
Photo/Video
can download, share or delete the photos you
Gallery
have taken and videos you have recorded on
your Pet Camera.
Overview of the features in Hubble App
> Track to track the location of your pet.
to set the radius for Geo Fencing.
once to speak
or
message to your dog through the
27