Wolf WGSC100S Use & Care Manual page 13

2 PROGRAMS
Select two different heat settings and time durations in one cooking session. For
example, program to cook on HIGH for 4 hours, then LOW for 3 hours. Ideal for
shortening the cooking time of items such as pot roasts to heat quickly on HIGH and then
allow to tenderize on LOW. It will automatically switch to WARM at the end of the cook
cycle.
Add food to vessel and cover with lid.
1.
Turn selector bezel to PROGRAM. The LCD screen displays
2.
flashing setting of "1 PROGRAM" and "2 PROGRAMS."
Turn the knob to the right to select "2 PROGRAMS." Release
3.
the knob once "2 PROGRAMS" is selected. The setting
will flash three times before it becomes solid. NOTE: If the
START/STOP button is pressed before the display stops
flashing, it will go to the next step in the setting process.
Once "2 PROGRAMS" becomes solid, flashing "CYCLE 1"
4.
and the heat settings will display. Turn the knob left or right to
select LOW, MEDIUM, or HIGH heat. WARM is not an option.
Release the knob once a heat setting is selected; then the
setting will flash three times before it becomes solid.
NOTE: To access the previous setting at any time, press the BACK button once.
Once the display becomes solid, the flashing "SETTING TIME"
5.
and "00:00" will display. Adjust the time setting by turning the
knob to the right to increase or to the left to decrease the time.
The time adjusts in 30-minute increments, with a minimum
time of 30 minutes and a maximum of 24 hours. Release the knob once the time is set
and the time will flash three times before becoming solid.
13