Avaya AP 8120 Installation Manual page 16

16 Access Point 8120 installation
2
3
4
5
.
The wall bracket is designed to use a minimum of 2 anchors and
a maximum of 4.
Install the screws into the wall anchors but do not seat them fully,
leave at least a 2mm gap between the screw head and the wall.
Slip the wall bracket over the heads of the screws and slide the
bracket to the right as viewed facing the wall.
Tighten the screws to secure the wall mounting bracket tightly
against the wall.
Align the mounting tabs on the bottom of the access point sheet
metal enclosure with the vertically oriented keyhole slots in the
mounting bracket.
Avaya WLAN 8100
Installation–AP 8120
NN47251-302 01.AD 10 May 2010