Viking K-1275-IP Series Product Manual
  1. Manuals
  2. Brands
  3. Viking Manuals
  4. Intercom System
  5. K-1275-IP Series
  6. Product manual

Viking K-1275-IP Series Product Manual

Voip entry phone system with built-in proximity card reader and color camera
Hide thumbs Also See for K-1275-IP Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Designed, Manufactured and Supported in the USA
VIKING
S E C U R I T Y & C O M M U N I C A T I O N S O L U T I O N S
Vandal Resistant VoIP Entry Phone System with Built-In Directory,
Proximity Card Reader, 12 Button Auto Dialer, and Analog Video Camera
The K-1275-IP is a durable and attractive hands-free phone for apartment and residential door entry
applications requiring a vandal resistant VoIP speaker phone with an integrated 125 KHz Proximity Card
Reader and analog Color Video Camera. The K-1275-IP phone is designed to provide quick and reliable
hands-free communication for SIP VoIP phone systems or cloud based service providers. The unit can be
programmed from any PC on the same LAN or remotely using a Static IP Address. The K-1275-IP entry phone
can dial up to 12 programmable numbers and another 12 rollover numbers. The brushed stainless steel
faceplate has a built-in 12 resident directory with a waterproof, scratch resistant lens and 12 buttons for single
push auto-dialing of a tenant's phone number or business extension.
When the K-1275-IP phone is connected to an apartment or business tenant, a built-in contact closure may
be activated to control an electric gate or door strike. Up to 1,000 keyless entry codes may be programmed,
providing tenants with keyless entry. The K-1275-IP has a built-in Proximity Card Reader with capacity to
program up to 1,000 card numbers. Keyless entry codes and card numbers can be programmed to only allow
access at specific times and/or day of the week. The K-1275-IP includes a request for exit (REX) input and
also offers event logging with time and date stamp.
The K-1275-IP-EWP shares all of the features of the K-1275-IP in addition to Enhanced Weather Protection
(EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products
feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal
plastic potted circuit boards. For more information on EWP, see DOD# 859.
• Built-in high resolution analog NTSC color video camera with wide viewing
angle, tilt/swivel adjustments and wide operating temperature: -40°F to 140°F
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card
read confirmation and EWP board protection
• Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate
with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal
keypad buttons and T-10 Security Torx drive mounting screws.
• Weather Resistant Features: Marine grade 316 stainless steel faceplate and
screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic
mount. Faceplate, mic and speaker gaskets.
• Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
• Optional RC-4A for Secure Remote Relay Control, see DOD# 582
• Blue "Call /Status" LED indicator
• SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
• PoE powered (class 2, <6.5 watts)
• Automatic Noise Canceling (ANC) feature for operation in noisy environments
• Viking's proprietary VOX switching eliminates the need for "Push to Talk" mode
• Network downloadable firmware
Applications
• Residential Gate Entrance
• Courtesy Assistance Phone
• Customer Service Phone
• Automated Teller (ATM) Phone
• Use with LRR-4 Long Range RFID Transmitter DOD# 226
• Use with any of Viking's Proximity Credentials: PRX-C, PRX-C-
ISO, PRX-FOB, and LRT-4 see DOD# 198 and 226.
www.vikingelectronics.com
PRODUCT MANUAL
Features
• Kiosk Phone with up to
12 number speed dialing
• Door Entry Phone
• Apartment Entry Phone
"Brushed 316 Stainless Steel"
(similar to brushed nickel)
• Programmable to speed dial up to 12 numbers
• Cycles to roll over phone number on busy or no-answer
• Program up to 1,000 keyless entry codes and/or proximity card numbers
• Keyless entry codes and proximity card numbers can be programmed to only
allow access at specific times and day of week
• Event logging with time and date stamp
• Optional Enhanced Weather Protection (EWP), EWP products are designed to
meet IP66 Ingress Protection Rating, see DOD# 859
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range (-40°F to 140°F)
• Programmable volume adjustments for microphone and speaker
• Selectable auto-answer feature for monitoring
• Zinc plated steel rough-in box included
• Optional LRR-4 Long Range RFID Reciever, see DOD #226
• Optional VE-5x10 Surface Mount Box available, see DOD #424
• Optional VE-LIGHT kit to illuminate the front panel at night, see DOD# 428
• Diagnostics (for testing mic, speaker, relays, and proximity cards)
Specifications
Power: PoE class 2 (<6.5 watts)
Dimensions: Overall: 5" x 10" x 2.5" (127mm x 254mm x 63.5mm)
Rough-in box: 4.5" x 9.12" x 2.5" (114mm x 232mm x 64mm)
Shipping Weight: K-1275-IP 4.4 lbs (2.0 kg), K-1275-IP-EWP 4.6 lbs (2.09 kg)
Operating Temperature: -30°F to 140°F (-34° C to 60° C)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with
auto cross over
Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors
K-1275-IP Series
VoIP Entry Phone System
with Built-In Proximity Card
Reader and Color Camera
August 23, 2017
K-1275-IP
K-1275-IP
(shown in optional VE-5x10-SS
surface mount box)
Installation requires the assistance of a
!
Network Administrator / IT Technician.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K-1275-IP Series and is the answer not in the manual?

Questions and answers

Related Manuals for Viking K-1275-IP Series

Summary of Contents for Viking K-1275-IP Series

  • Page 1 • Optional VE-5x10 Surface Mount Box available, see DOD #424 • Automatic Noise Canceling (ANC) feature for operation in noisy environments • Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode • Optional VE-LIGHT kit to illuminate the front panel at night, see DOD# 428 •...
  • Page 2 Viking VoIP SIP System Compatibility List NOTE: Exclusion from this list means only that compatibility has not been verified, it does not mean incompatibility. For detailed configuration instructions for certain vendors below, see Configuring Viking VoIP Phone and SIP Servers, DOD# 944.

  • Page 3: Camera Specifications

    Right 30° correct video color in outside applications. The standard camera is NOT compatible with IR illuminators. If IR illumination is required, you will need to replace the existing camera with a Viking model VCAM-1IR. For more information, see DOD# 190.

  • Page 4: Features Overview

    Optional: Connect to an additional Optional Power Long Range Long Range RFID Receiver with 26 RFID Receiver - Black Bit Wiegand Output (Viking Model PRX-3 or LRR-4 See DOD# 228 or + Red 226) White PoE LAN Port 10/100, Proximity Card PoE Class 2 (<6.5 Watts):...

  • Page 5: Installation And Mounting

    4.50" 4.5" 2.596" 0.952" 0.425" 9.12" 10.14" - OR - 10.0" 8.65" 9.5" VIKING © (8) #6-32 x 3/4" Stainless Zinc-Plated Steel Steel, T-10 Torx Security Rough-In Box 14 Gauge Marine Screws with drive bit (included) Grade 316 Stainless (included) Steel Faceplate B.
  • Page 6 IP video Twisted foil and braided shield encoder (Axis M7001), etc. Yellow/Red ** Note: For ease of installation, a Viking Female "F" to Wire Converter Cable can be used (Part # 261217) or Black - Black (GND) "BNC" to wire converter cable (Part # U213510) can be ** Female "F"...
  • Page 7 The front panel of the K-1275-IP is mounted using security Torx screws to help prevent intruders from removing the panel and accessing the on board door strike/gate control relays. For applications requiring additional security, a Viking model RC-4A remote relay controller can be used. The relay controller is mounted securely inside the building and connected to the same LAN as the K-1275-IP.
  • Page 8 Requirements above). The PC must be connected to the same LAN as the K-1275-IP VoIP phone. Install the application on your PC by placing the DVD into your PC’s drive. Click “I Accept” on the bottom of the first screen, then select “Viking IP Programming”...
  • Page 9 A. Connect/Disconnect Open the “Viking IP Programming” software on the PC and the start screen shown below will appear. Any Viking IP phones that are connected to the network will appear on the list. Simply select the K-1275-IP on the list and click on the “Connect”...
  • Page 10 C. Configuring the K-1275-IP Network Settings Open the “Viking IP Programming” software on a windows PC that is connected to the same LAN as the K-1275-IP phone to be Step 1. programmed. The window in the upper left corner of the menu will show you each K-1275-IP phone that is connected to that LAN. Select the unit Step 2.
  • Page 11 Programming Features Index DESCRIPTION Section Page Connect/Disconnect Phone Number Database Event Log Entry Code Database Phone Name Mute Alarm Until Next Failure Phone Firmware IP Firmware Import/Export Default Phone Settings Diagnostics (used to check mic, speaker, relays and proximity card reader operation) Security code (factory set to 845464) Access Code (1-6 digits, blank = disabled, factory set to 123456) Inbound Call Mode (Disabled, Auto Answer, Auto Answer Secure, Silent Monitor, Silent Monitor-Secure)

  • Page 12: Programming Features

    Programming Features 1. Phone Number Database Clicking on the “Phone Number Database” button will open a screen allowing you to program all the Tenants Name’s, Speed Dial Numbers, and Primary and Roll Over phone numbers. Tenant names are stored locally on the PC and are not uploaded.
  • Page 13 2. Event Log The Event Log button is used to open the Event Log screen. The Event Log screen shows you the time and date of each event, the event type, relay action (which door/gate was opened or closed), entry code index and phone number index with tenant name.
  • Page 14 Another way to update is accomplished by clicking the phone firmware “Update” button. You can then browse to the folder that contains the HEX file for updating the unit’s firmware. This method is typically only used when Viking Technical Support has sent you updated firmware.
  • Page 15 10. Diagnostics The Diagnostics section in the Viking IP Programming can be used to test the functionality of the two relays, read current relay status, perform mic/spkr diagnostics, or to display information on the last card or fob detected by the card reader.
  • Page 16 With relay 1 and/or 2 set to “Internal” the K-1275-IP will activate its on board relays for door strike / gate control. Relay 1 and/or 2 should be set to “External” for higher security installations when using a Viking remote model RC-4A relay controller to activate the...
  • Page 17 21. Relay Activation Delay A relay activation delay of 0.5 to 99 seconds or disabled can be programmed in the K-1275-IP. A relay activation delay is useful in two door vestibule entrance applications. This allows you to program a delay time from when relay 1 (outside door) is activated to when relay 2 (inside door) is activated.

  • Page 18: Operation

    29. Call Length Time Out This feature selects the maximum length of time that calls can be connected. Programmable in increments of 1 minute up to a maximum of 9 minutes or disabled. With the call length disabled, the K-1275-IP phone must rely on a call ended signal, busy signal, Ring No Answer limit, or touch tone “#”...

  • Page 19: Troubleshooting

    B. Remote Access Operation Commands The following commands can be entered after answering an inbound call from the entry phone. The commands can also be entered on an outbound call to the entry phone. After the entry phone auto answers the call, one or two beeps will be heard. If the access code has been disabled (two beeps heard), you can now enter the Remote Access Operation Commands below.

  • Page 20: Related Products

    Caution: Handsfree phones are not suitable for noisy applications (see “Important” on page 2). For more information on Viking Surface Mount Boxes and Pedestals, see DOD# 424. Add Panel Lighting to Your Viking VoIP Entry Phone The VE-LIGHT kit adds bright LED illumination to any VoIP entry phone that is housed in a Viking VE-5x5, VE-6x7 or VE-5x10 enclosure.
  • Page 21 Relays can be toggled on or off, or user-programmed timed closures can be activated. The RC-4A can be configured to work as a remote relay for Viking VoIP series entry phones, controlling door strikes and gates when a remote relay is required for security reasons. It can also be programmed to send an email or text message in response to a change in one or more of the sensor inputs.

  • Page 22: Warranty

    TWO YEAR LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016.

Table of Contents