Check The Package; Assemble The Short-Handlebar - Robstep Robin M1 Product Manual

5.4 Check the package

In this part it shows how to assemble a short-handlebar
M1 short handlebar package come with the following components(View 3.1), please contact local distributor or us if
you find something missing.

5.5 Assemble the short-handlebar

Step 1: Make sure M1 is disconnect with charger and turn off.
Step 2: According to the instruction, dismantle the handlebar of M1. User can use the Allen key to loosen the screws, and get rid of
the handlebar. Please keep the screw cap and screws in a memorable place.
Step 3: Insert the short-handlebar into the axle mounting area (see the below detailed picture NO. 2), make sure to mount it with
right position and keep the short-handlebar stand still and motionless.
Step 4: Tighten up 3 screws( make sure the logo is facing front). Insert the screw cap onto the mounting area and confirm that the
short-handlebar is stand still; turn the handlebar left and right and make sure that if it's assembled correct.
Use mobile app to adjust running parameters of M1, please reference to 14.5
Step 5:
15