Buttons Of Remote Control - Robstep Robin M1 Product Manual

again by the remote key. If you long press the off button under the state of shutdown, the system will cut down the main power
automaticlly, and also enter into the state of deep shutdown. Press D" shutdown" button again during power off mode,system
will cut down the main power automatically. In order to save more power. Press the button beyond charging gate will power M1
on.
A + C : under unmanned mode. press button A for 3 seconds(the buzzer will make a sound of tick) ,
then press button C in the following 3 seconds, M1 can enter into self-checking system. Before the start of self-checking, the
body of Robstep shall be hung up. In the state of self-checking, you will hear the bumming sound and all five lights keep
flickering. The system of Robstep itself will conduct a series of self-checking, in the meanwhile, the wheels will turn on
automatically in a slow speed. If there is no problem after self-checking, the system will shut down normally. Otherwise, warning
sound of beeping will come from the buzzer and it will turn off automatically. Under this condition, we insist that you should send
the M1 to your local agent or contact with us directly.

4.2.1 Buttons of remote control 2

You can control Robstep-M1 by the remote control within 10 meters.
In some heavy
electromagnetic interference area may not reach 10 meters
7