Controlling Of Robstep And The Display Device - Robstep Robin M1 Product Manual

4. Controlling of M1 and the display device
4.1 Remote control of Robstep 1
You can control Robstep-M1 by the remote control within 10 meters.
power saving, Then you should press the power butter in the back of the main body to restart the M1, And it can be power on
In some heavy
electromagnetic interference area may not reach 10 meters
A: the beginner mode. Pressing this button so you can enter into the beginner model
whose speed limits within 7km per hour. If you don't use it for more than 10minites, then
M1 will shut down automatically.
B: warning and locking mode. Pressing the button M1 can keep locked and give
bumming and vibrating while someone else attempts to move it. If you want to unlock it,
just press it again. However, if you keep the M1 in the state of bumming within 18 hours,
it will turn off automatically.
C: normal mode. You have to turn off the beginner mode when you want a normal mode.
Turn off the power and then turn it on so you can enter into the second mode with speed
limit within 15km per hour.
D: shutdown. Press the button and M1 will be power off. In this mode, the system will
auto enter into the state of deep shutdown if leave M1 for more than 18 hours, as for
6