Robstep Robin M1 Product Manual page 14

As the image at left side, the remote control contain 5 area. A,B,C,D are function buttons, F is the display area.
A Turn on normal mode button. This button have 2 function:
When the unit is turned off by remote, turn it on again by pressing this button for 4 seconds.
will turn off automatically.
When M1 is turn on, long press C button, when you hear a beep sound then press A button,M1 will be in self checking mode.
D Lock mode
When M1 is turn on and idle, by pressing this button M1 will enter lock mode. By pressing this button again lock mode will be
turn off. In this mode, if somebody touch it, it will vibrate and have sound alarm. If M1 in lock mode for more than 18 hours, it will
shut down automatically.
When M1 is turn off and already connected with remote control, by pressing this button M1
will enter normal mode (top speed limit to 15km/h). If M1 is idle for more than 10 minutes, it
will turn off automatically and remote control will enter energy saving mode. If M1 shut down
(idle for more than 18 hours), remote control will turn off automatically.
B Turn off. This button have 2 function:
Turn off the unit by pressing this button for 4 seconds.
In unmanned mode ,when the remote control have been connected to M1,It was on
unmanned mode ,Press the button M1 to turn it off.
C Beginner mode. This button have 2 function:
When robstep is turned off and connected with remote control,by pressing this button M1 will
enter beginner mode (top speed limit to 7KM/H). M1 will turn off automatically when it is idle
for more than 10 minutes and remote control will enter energy saving mode and keep
connected with M1. If M1 is in shut down mode( idle for more than 18 hours), remote control
8