Planar Dome EX User Manual page 22

12 | Dome EX Display
Install the AX3 Display Driver
Before you install the driver, remove any previously installed display
driver for the display controller from your system.
To install the driver
1 Start the system. Click Cancel on the Found New Hardware Wizard.
Click No when the system prompts you restart the computer.
2 Insert the driver installation CD and run SETUP.EXE.
3 Click Next.
4 Click Yes to the license agreement. The installation starts.
5 Follow the onscreen instructions to complete the installation.
Planar recommends that you select the Express installation option.
6 When the Setup complete message appears, select Yes, I want to
restart my computer now. and click Finish.
7 If the Digital Signature Not Found message appears, click Yes or
Continue to complete the driver installation.
To configure the display
1 Right-click the desktop and select Properties > Settings.
2 Use the native resolution of the display.
3 Click OK until you return to the desktop.