SPORTCITY CUBE 250 - 300
•
Undo and remove the three fixing
screws of the exhaust silencer.
•
Remove the exhaust system.
Removal of the engine from the vehicle
Preventively remove:
•
Helmet compartment.
•
Rear central cover.
•
Right and left fairings.
•
Tail section.
•
Entire lower cover.
•
Rear brake calliper and release the
pipe.
•
Get a container of adequate capacity
to collect the fluid and place it under the
cooling system pump.
•
Remove the expansion tank cap.
•
Loosen the clamp and remove the ra-
diator - pump pipe and allow the cool-
ant to drain into the collecting contain-
er.
•
Unscrew the spark plug tube and re-
lease its cable from any retainer.
Engine from vehicle
ENG VE - 99