Table of Contents
Advertisement
Injection
12. HV coil
Tachometer
With interface wiring disconnected from the control
unit and connected to the system, check that the
sensor resistance between pins 13 - 15 is between
100 and 150 Ohm at an engine temperature of
about 20°
Disconnect the fuel pump connector. Start the en-
gine and wait for it to stop. With the wiring con-
nected to the control unit and the system, try to
start-up the engine and check that the alternating
voltage between pins 13 and 15 is over 2.5 V ~
INJEC - 186
SPORTCITY CUBE 250 - 300
Advertisement
Table of Contents
