Installation Manual of Network Camera
Press RESET about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port No., etc.
3.4.2 Installation
Ceiling Mounting
Steps:
1. Drill the screw holes on the ceiling with the supplied drilling template. If you need to route the
cables from the bottom of the camera, cut a cable hole in the ceiling.
2. Secure the back box to the ceiling with screws.
3. Loosen the set screws with the hex key (supplied) to remove the bubble; remove the black liner.
Lo-Call 1890 866 900
Downloaded from
www.Manualslib.com
Screw hole 3: for
Mounting Base
Figure 3-34 Drilling Template
Figure 3-35 Mount Back Box
manuals search engine
Drill Template
4
4
2
2
1
3
3
Hole A: for cables routed
through the ceiling
3
3
2
1
2
4
4
Code:190600839
www.cctvireland.ie
37
shop@cctvireland.ie