HIKVISION DS-2CD series Installation Manual page 57

56
Installation Manual of Network Camera
9. Install the inner black liner back to the camera.
10. Align the bubble with the camera.
11. Tighten the screws to secure the bubble with the camera as shown below.
Figure 3-71 Secure the Bubble

Wall Mounting
For the wall mounting, you have to purchase a wall mount.
Steps:
1. Disassemble the camera.
2. Install the wall mount and mounting adapter as shown below.
3. Align the screw holes of the mounting base with the corresponding screw holes of the mounting
adapter.
4. Secure the mounting base to the mounting adapter with four screws.
Mounting Adapter
Mounting Base
Figure 3-72 Secure Mounting Base
Lo-Call 1890 866 900 www.cctvireland.ie shop@cctvireland.ie
Downloaded from www.Manualslib.com manuals search engine