Installation Manual of Network Camera
3.2 Type II Dome Camera
3.2.3 Camera Description
Press RESET button about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port No., etc.
Lo-Call 1890 866 900
Downloaded from
www.Manualslib.com
No.
1
2
3
Power LED indicator, It turns solid red when power is connected.
4
5
6
When the network is connected, the "S" LED is solid yellow, while the "L"
7
8
manuals search engine
Figure 3-16 Overview
Table 3-2 Physical Description
Description
Cover
Lens
Base plate
Set screw hole
Set screw of lens
S & L: Network status indicator.
LED flashes orange.
RESET Button
www.cctvireland.ie
26
shop@cctvireland.ie