HIKVISION DS-2CD series Installation Manual page 100

Installation Manual of Network Camera
1. Loosen the lock screw-1.
2. Adjust the panning position of the camera. The adjusting range is from 0 degrees to 360 degrees.
3. Tighten the lock screw-1.
Tilt Adjustment
Steps:
1. Loosen the lock screw-2.
2. Adjust the tilting position of the camera. The adjusting range is from 0 degrees to 90 degrees.
3. Tighten the lock screw-2.
Rotation Adjustment
Steps:
1. Loosen the lock screw-3.
2. Rotate the rotation position to adjust the azimuth angle of the image. The adjusting range is from 0
degrees to 360 degrees.
3. Tighten the lock screw-3.
 Zoom and Focus Adjusting
Purpose:
You can use the zoom lever and focus lever to adjust the zoom value and focus value.
Steps:
1. Disassemble the camera.
2. View the camera image using the monitor.
3. Loosen the zoom lever and move the lever between T (Tele) and W (Wide) to obtain the
appropriate angle of view.
4. Tighten the zoom lever.
Lo-Call 1890 866 900
Downloaded from www.Manualslib.com
Panning
2
Tilting
Figure 4-32 Lens Adjustment
manuals search engine
1
3
www.cctvireland.ie
99
Rotation
shop@cctvireland.ie