Advertisement
XL-R2010BK
<CD Mechanism assembly>
Removing the clamper base assembly and
tray (See Figs. 1 to 5)
1. Remove the two screws A attaching the clamper
base assembly from the top of the CD mechanism
assembly.
2. Move the clamper base assembly diagonally
upwards as indicated by the arrow to release it from
the two hooks a.
3. Turn the idle gear in the arrow-marked direction
from the upper side of the CD mechanism
assembly. Accordingly, the traverse mechanism
assembly moves downwards.
Note: When drawing out the tray, shift down the
traverse mechanism assembly to the
position where the tray does not contact the
turn table assembly of the traverse
mechanism assembly.
4. Draw out the tray frontwards for removing it.
Note: When reinstalling the tray:
Turn the idle gear so that the part b of the
tray gear is positioned in the part c shown in
Fig. 4. (Eject position)
Engage the right and left hooks d and e of
the tray with the right and left grooves of the
loading mechanism assembly respectively
for retaining the tray.
Hook d
1-12
Idle gear
Tray gear
Hook e
Tray
Fig. 5
Clamper base assembly
A
Fig. 1
Traverse
mechanism
assembly
Tray
Fig. 2
Traverse mechanism assembly
Tray
Fig. 3
Tray gear
Fig. 4
Hook a
A
Hook a
Idle gear
Idle gear
Part c
Part b
Advertisement
