Advertisement
Removing the fitting of the CD-R/RW
mechanism section (See Fig.6 to 9)
Prior to performing the following procedure, remove
the top cover.
1.
Push the slide cam c until it stops through the slot on
the left side of the CD-R/RW mechanism assembly.
2.
Pull out the tray manually.
3.
Release the joint d on each side of the fitting
upward, then remove the fitting from the tray.
4.
Push and return the tray.
Front panel assembly
CD-R/RW mechanism
assembly
Fitting
Joint d
Fitting
Joint d
Tray
XL-R2010BK
Slide cam c
Slot
Slot of the CD-R/RW mechanism
section to pull out the tray
Fig.6
CD-R/RW mechanism assembly
Front panel assembly
Fig.7
CD-R/RW mechanism assembly
Tray
Fig.8
CD-R/RW mechanism assembly
Fig.9
1-7
Advertisement
