Table of Contents
Advertisement
D. Record / Stop-Record
1. Power on / Record
Turn on the power, and it will take approximately 40 seconds
to boot up. During the recorder booting up, the HDD
indicator LED will start flashing as the recording is in
progress.
Light indicator:
Red light: light on, means power on; light off, means no
●
power/power off.
Green light: light flashing , means HDD take recording;
●
light off means non-recording.
Yellow light: On when internet connection; off when
●
internet disconnection.
Blue light: On when GPS positioning is ready; off when
●
GPS is not ready.
★ Remark: While using playback function in DVR, it cannot
take live recording at that time.
2. Power off/Stop recording:
Power off also stop recording, at then you can take out
HDD to read the recorded files.
7
Advertisement
Table of Contents
