Vacron VDH-4200B User Manual
  1. Manuals
  2. Brands
  3. Vacron Manuals
  4. DVR
  5. VDH-4200B
  6. User manual

Vacron VDH-4200B User Manual

4ch / 8ch h.264
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
 
4CH / 8CH H.264

Digital Video Recorder

USER MANUAL
2013 JAN V1.1

Advertisement

Table of Contents
loading

Related Manuals for Vacron VDH-4200B

Summary of Contents for Vacron VDH-4200B

  • Page 1: Digital Video Recorder

      4CH / 8CH H.264 Digital Video Recorder USER MANUAL 2013 JAN V1.1...
  • Page 2   WARNING  Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the performance of DVR and damage the machine.  Do not touch the power plug or case with wet hands as this could result electric shock.

  • Page 3: Table Of Contents

      CONTENTS Specification ..................... 1 Structure of Product .................. 2 DVR Installation ..................4 System Operation ..................4 Display Setup ................... 6 Search ...................... 9 Main Menu ....................10 6.1 Camera Setup ................11 6.2 Record Setup ................. 13 6.3 Alarm Setup ................... 15 6.4 Motion Detection ................

  • Page 4: Specification

    1. Specification Video Format NTSC Video Input 4/8 CH Input / BNC Audio Input 4 CH Input / RCA Video Output 1 CH Output / BNC Audio Output 1 CH Output / RCA XGA Output 800x600, 1024x768, 1280x1024, 1440x900 Alarm Input 4CH Alarm In Alarm Output Buzzer, 1 x Relay Out (N.O, N.C)

  • Page 5: Structure Of Product

    2. Structure of Product  Front Panel Under the live viewing mode, press MENU to enter the main menu. Menu Under the menu mode, press MENU to go to the upper menu. Manual Record Press this button to start recording in live mode. Under the playback mode, press the button to stop the operation or Stop go to upper menu.
  • Page 6  Installation 4CH DVR 8CH DVR USB Mouse Port 2.0 USB Mouse VIDEO IN 8CH Video Input (BNC) VIDEO OUT 1CH Video Output (BNC) AUDIO OUT 1CH Audio Output (RCA) AUDIO IN 4CH Audio Input USB 2.0 Port USB Backup or Firmware Update ALARM Alarm I/O DC12V...

  • Page 7: Dvr Installation

    3. DVR Installation  Connect the camera video output to the DVR video input port with BNC connectors. The camera install coaxial cable is suggested cat 6 or above.  DVR Network installation Please connect DVR to HUB or router by using RJ-45 network cable and make sure the DVR network indicator LED is on.
  • Page 8 Stop Record Play Step/Pause Fast Rewind Slow Forward Fast Forward Zoom in/out PTZ IRIS PTZ Setup PTZ Focus Search Mute Auto Switch Remote ID Setup Up Selection Information Left Selection Enter MENU Right Selection Down Selection Cancel Split Windows display Quad Display Channel 1~8 ...

  • Page 9: Display Setup

     Main Menu Operation Main menu Setup Operation Front Panel & Remote Control USB Mouse Select [Up/Down/Left/Right] [Moving Cursor] Enter Select Menu [Enter] [Left Click]  Setup Operation Setup Setup Operation Front Panel & Remote Control USB Mouse Select [Up/Down/Left/Right] [Moving Cursor] Confirm Select Setting [Enter]...
  • Page 10 Setup Operation Front Panel&Remote Control USB Mouse Channel 1~4/8 Single Channel Select one of channel [CH1~4/8] Display [Double click left button] Under single channel 4/8 Channel Split Display [4/8 CH Split] [Double click left button] Quick Menu [MENU] [Right] Playback Mode [Play] [Right] QuickMenu Start/Stop the Manual Record...
  • Page 11 Zoom +,- Focus, +- Iris, +- Adjust Movement Speed PTZ Up / Down / Left / Right Start/Stop Auto Tracking Exit [Right click] or [Left click  Playback Operation Front Panel & Remote Setup Operation USB Mouse Control Fast Rewind [Fast Rewind] Fast Forward [Fast Forward]...

  • Page 12: Search

    6. Search In Live mode, use Play button in the front panel/remote controller or right clicking the mouse to switch to the Search function. Front Panel & Remote Setup Operation USB Mouse Controller Search [Enter] [Left Click] Select Channel [Up/Down] [Moving Cursor] Select Dates [Up/Down/Left/Right]...

  • Page 13: Main Menu

     Record List Front Panel & Setup Operation USB Mouse Remote Controller Enter Select Item [Enter] [Left Click] Select Item [Up/Down/Left/Right] [Moving Cursor] Return to Upper Menu [MENU] [Right click] or [Left click First Page Previous Page Next Page Last Page Mark all the events in this page BackUp ...

  • Page 14: Camera Setup

    6.1 Camera Setup  Channel Select one channel to set. Use CopyButton to copy present settings to other channels.  Camera Title Set the title of camera. Key in by using virtual keyboard.  Title Position Set the title position. Set: Top Left, Top Right, Bottom Left, Bottom Right and Off.

  • Page 15: Baud Rate

     Protocol Speed dome protocol. Set: PELCO P, PELCO D, MIKAMI or off.  Address Speed dome address. Set: 0~255  Baud Rate Speed dome baud rate. Set: 1200, 2400, 4800, 9600, 19200.  Tilt Opposite Set speed dome image upside down. Set: On/Off ...

  • Page 16: Record Setup

    6.2 Record Setup  Record Enable Setup On/Off the channel. Watermark: Insert the words of watermark 4CH DVR 8CH DVR  Resolution Setup NTSC Recording Resolution: 720x480 / 720x240 / 360x240. PAL Recording Resolution: 720x576 / 720x288 / 360x288. 4CH DVR 8CH DVR ...

  • Page 17: Record Schedule

     Quality Setup Setting of recording quality: Values 1-5. The bigger value, the better quality. 4CH DVR 8CH DVR  Pre Record setting Pre Recording time when motion alarm. Values: 0-10 seconds.  Audio On/Off the sound effects.  Encode Mode Encoding of channel.

  • Page 18: Alarm Setup

    6.3 Alarm Setup  Channel Select the channel to set. COPY icon can copy the present setting to other channels.  Sensor Mode Sensor Mode alarm trigger. Set: OFF / NO / NC. Relay Mode  Relay Mode alarm trigger. Set: NO / NC ...

  • Page 19: Network Setup

     Motion Area Setup Setup by each small square. Setup Operation Front Panel & Remote Controller USB Mouse Area Selection [Up/Down/Left/Right] [Moving Cursor] Set Detection Area: must set (1)Move to the area on none detection [Drag by Left Click] (2)Press Enter to set the area area(Transparent Area) Clear Detection Area: clear the (1)Move to the area...
  • Page 20  Command Port Port used for settings. Default is port 8000.  Mobile Port Mobile phone port (factory default): 15961.  IP Address Assigned IP address.  Netmask Assigned net mask  Gateway Assigned gateway  HOST Name Set the HOST Name of DVR. PPPOE/3G ...

  • Page 21: Log Search

     DDNS Server DDNS Server, Values: 3322, dyndns, cctvdvr. When using DDNS server, HOST name, server name and account/password are required.  E-Mail Setting  E-MAIL Forward E-mail after alarm triggered. Enable: On/Off  SSL Enable the SSL encryption. Recommend to set on if it is using gmail.

  • Page 22: Backup

     Start/End time Set the search range (Year/Month/Day). Press [SEARCH] to search. Front Panel & Remote Setup Operation USB Mouse Controller Enter Select Item [Enter] [Left Click] Select Item [Up/Down/Left/Right] [Moving Cursor] Return to Upper Menu [MENU] [Right click] or [Left click First Page Previous Page Next Page...

  • Page 23: System

    Storage Device Choose 6.8 System Time Setup Display System Information Password Language Audio System Maintenance 6.8.1 Time Setting  Date/Time Select by using virtual keyboard.  Date Format Setup  ...

  • Page 24: Hdd Setup

    Set: YY/MM/DD, MM/DD/YY.  Time Format Setup Set: 24Hours, 12Hours.  Time Zone Setup Time Zone setting of DVR.  NTP Setting（Network Time Protocol） NTP: On or Off Schedule Time: Using virtual keyboard NTP server: Using virtual keyboard 6.8.2 HDD Setup ...

  • Page 25: Display Setting

     USB Disk Info Format USB Memory Stick 6.8.3 Display Setting  GUI Display GUI display mode can be VIDEO or VGA.  Video Switching Time Set the switching time when switching channels in video mode. Values: 1-99 seconds. (0 sec is Off) ...

  • Page 26: System Information

    4CH DVR 8CH DVR      Video Margin Set the display margins of the screen. They are Left, Right, Top and Bottom with range between 0 - 36.  XGA Resolution XGA Resolution: 800x600, 1024x768, 1280x1024, 1440x900. 6.8.4 System Information Provide the firmware version, MAC address, HDD status….

  • Page 27: System Language

     Password Setup Enable/Disable password checking. Values: On/Off (Default) Administrator account/password can not be blank. And at least 4 characters for the password.  Administrator account/password Administrator account allows user to access all of functions.  User account/password Access rights can be assigned by setting. ...

  • Page 28: System Maintenance

     Audio Volume Set the volume of audio In/Out. Values: 1-10. (Default: 5) 6.8.8 System Maintenance  Auto maintenance: Set time for auto rebooting. Value: On/Off. Auto rebooting setting  F/W update Please plug the USB memory stick into the USB port on the DVR rear panel after download the new firmware to the USB memory stick.

  • Page 29: Cell Phone Monitoring Operation

    8. Cell Phone Monitoring Operation  JAVA Script surveillance: 1. The mobile Phone must support JAVA Script 2. To download the JAVA software: open Internet Browser on the mobile phone, and enter the IP address of the DVR and add /viewer.jar at the end. Example: http://xx.xxx.xxx/viewer.jar.
  • Page 30 ■ Android Software install/setup procedure Before the installation, please check the ”Allow Non-market application” or “unknown source” checkbox in your mobile phone< PIC 1~2>. <PIC 1> < PIC 2> First method 1. First, please make sure the PC synchronize software had installed and activated in your Android mobile phone.
  • Page 31 <PIC 4> Method two You may copy the APK installation package to your mobile phone or memory card, and then install it through other software. 1. Copy the “Castillo player” software package to your mobile phone through USB or directly to SD memory card. 2.
  • Page 32 3. Run the AppInstaller program, install the APK software package from your SD memory card<PIC 7~8>. <PIC 7> <PIC 8> 4. After the installation, you may find the “Castillo Player” in your program list, click it to run the program<PIC 9>. <PIC 9>...
  • Page 33 5. Press the “Setup” button to setup the connection setting <PIC 10>. Enter your individual configuration<PIC 11>. <PIC 10> <PIC 11> 6. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting<PIC 12~13>. <PIC 12>...
  • Page 34 7. Press “Connect” button<PIC 14>, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established<PIC 15>.   <PIC 14> <PIC 15> 8. <PIC 16>Operate instruction below: Connect/Disconnect Set up Channel Display screen PTZ Zoom/aperture/focal Snap shot...
  • Page 35 ■ iPhone software install/setup procedure 1. Download the “Castillo player” in AppStore then install it to your IPhone. <PIC 1~6>   <PIC 1> <PIC 2> <PIC 3> <PIC 4> <PIC 5> <PIC 6>  ...
  • Page 36 2. Run the “Castillo Player” after installation<PIC 7>. Press “setup” button to setup the connection setting<PIC 8>. Enter your individual configuration then press “back” button to go back to the main screen<PIC 9>.     <PIC 7> <PIC 8> <PIC 9>  ...
  • Page 37 4. <PIC 12> Operate instruction below: Display screen Zoom/aperture/focal distance  PTZ direction control Channel  Connect/Disconnect Set up Snap shot Next page    Full screen      <PIC 12>   ...
  • Page 38 ■ Symbian Software install/setup procedure 1. Copy the Symbian player to your mobile phone or memory card; you may see the example below in the case of NOKIA. <PIC 1~5>                 <PIC 1> <PIC 2>...
  • Page 39   <PIC 6>    3. Before the installation, please make sure you had cancel the “Only Signed Application”, also cancel the “Connection credentials check” <PIC 7~11>.                 <PIC 7> <PIC 8> <PIC 9>  ...
  • Page 40                                                       <PIC 10> <PIC 11>  4. Enter the folder which you’d saved the live view software “fuho_20110221.sisx”, double click to install, follow the instruction to proceed <PIC 12~22>. ...
  • Page 41                       <PIC 18> <PIC 19> <PIC 20>          <PIC 21> <PIC 22>  5. After the installation, enter the “Installed Application” and you may see the “Castillo Player” inside <PIC 23~25>.   ...
  • Page 42   6. Click and run the Castillo Player program <PIC 26~27>.          <PIC 26> <PIC 27>   7. Press the “Setup” button to setup the connection setting. After setting complete, click the “Add to my favorite” button to save the setting. Press “Connect” button, it’ll connect to the DVR according to your setup <PIC 28~32>.
  • Page 43         <PIC 31> <PIC 32> 8. <PIC 33>Operate instruction below: Display Screen PTZ direction control  Zoom/ Aperture/ Channel Focal distance Connect / Disconnect Exit Snapshot Set up Full screen Next page Add to <PIC 33>  ...
  • Page 44 ■ Windows Mobile Software install/setup procedure 1. Please install “Microsoft ActiveSync” into the PC before installing CAB software. 2. Execute the Microsoft ActiveSync program in your PC first, and connect the Windows Mobile SmartPhone to PC via USB, then it’ll synchronize the SmartPhone and PC.
  • Page 45 5. Please disconnect the SmartPhone from your PC, and begin the installation below: 6. Execute the Castillo Player CAB install package from the File browser, you may find it in your mobile device folder <PIC 3~5>. <PIC 3> <PIC 4> <PIC 5>...
  • Page 46 <PIC 9> <PIC 10> 8. Run the Castillo Player program, press the “Setup” button to setup the connection setting. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting. Press OK and Leave to go back to the main screen <PIC 11~14>.
  • Page 47 <PIC 14> 9. Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established <PIC 15~16>. <PIC 15> <PIC 16>  ...
  • Page 48 10. <PIC 17>Operate instruction below: Channel Connect/Disconnect Display screen PTZ direction Control snapshot Zoom/aperture/focal distance <PIC 17>  ...
  • Page 49  Blackberry Software Connect Procedure Blackberry RTSP Connect procedure: Verify Authentication, website address input format as below rtsp://(website address)/ch(channel number)?user=(user ID)&pwd=(user password) e.g. rtsp://f16.cctvdvr.com.tw:554/ch2?user=2222&pwd=2222 Mobile Webpage: Please enter the ID & password again after you login, or you’ll get black screen of permission denied as below:  ...

  • Page 50: H264 Player Operation

    H264 Player Operation  Preface H264 Player software allows to playback the backup saving file from the DVR.  System Requirement Operating System: Windows 2000, XP, Vista, Windows 7. Program obtainment and installation  While user start to backup the file from DVR, the system will automatically copy the H264Player.exe file and recorded data to the backup device for example, an USB flash memory stick.

  • Page 51: User Interface

     User Interface Open File Click Pause Click Stop Click Play 1x Click Fast Forward Click Slow Forward Click Capture the image (snap Click shot) to the host computer Volume Control Drag Rewind Click Step Forward Click Mark start time Click Mark end time Click...

  • Page 52: H264 Hdplayer Operation

    H264 HDPlayer Operation  Preface H264 HD Player supports direct HDD playback through USB connection. It also supports to playback the individual recorded video files.  System Requirement Operating System: Windows 2000, XP, Vista, Windows 7.  Execute the installation file Step 1: Ask for the Installation Step 2: Select the Install Location Step 3: Select Additional Tasks...
  • Page 53  User Interface Event Search   Backup Player Snapshot Volume Control Step Fast Play 9 Win Slow Play 4 Win Stop 1 Win Pause Play Backup Open Disk Mark Out Mark In Open File  Pop-up Menu Right click the mouse to open the pop-up menu including Setting  ...

  • Page 54: Web Operation

    Web Operation  Preface The Web Application Manager allows the user to remotely monitoring, playback, and backup through the DVR.  System Requirement Operating System: Windows 2000, XP, Vista, Windows 7 Web Browser: Internet Explorer  Add-on Installation Please use the IE browser to login the IP address of DVR setting. If the user is the first time to login the page, the system will ask the user to download and install the add-on as you can see the page below.

  • Page 55: Live Mode

     Live mode Start/Stop the Live Monitoring Click Click Start recording or Stop recording Record the Footage to Computer (saving path: Setup/Information) Click to snap shot the image (saving path: Snapshot the Image Setup/Information) Click under the live viewing mode to enable the Enable/Disable Audio audio, and click to disable...
  • Page 56  Playback (1) Select Date Event Search (2)Click (3)Click Playback Click on pop up file list Fast Forward Click “Fast Forward” (Speed: 2X, 4X, 8X, 16X) Rewind Click “ Rewind” (Speed: 1/2, 1/ 4X, 1/ 8X, 1/ 16X) Step Forward Click “Previous”or “Step”...
  • Page 57  DVR Setting Cameras Please refer “Camera Setup” for more information Record Please refer “Record Setup” for more information. Alarm  ...
  • Page 58 Please refer “Alarm Setup” for more information. MotionDetection Please refer “Motion Detection” for more information. Network setting E-MAIL  ...
  • Page 59 Log search  System Setting Date/Time Setting HDD Management  ...
  • Page 60 Display System Information Account/password  ...
  • Page 61 Audio Setting System Maintenance  Host setting  ...

  • Page 62: Appendix

    Appendix   This appendix will show you how to do the basic operation step-by-step on search, playback, backup, network setup, email setup, and DDNS setup. 12.1 How to search and playback the footage step-by-step? Step 1. Press the SEARCH button There are two ways to enter the search menu.
  • Page 63 Step 2. Select the date & time to playback the footage. Once you enter the search menu, you can have 3 optional selections to playback the footage as the picture below. 1. Date and Time Search 1.1 Select the channel and type of event that you wish to playback. 1.2 Enter the date &...
  • Page 64 2.1 Select the specified date from the calendar selection, 2.2 Select the specified time from the 24hours time bar selection. Note:  No data: NO color; data of alarm trigger: color; normal record data: Green color  Each hour is divided into 2 time frames, 1 and 2 half of the hour, 00min:00sec to 30min:00sec and 30min:00sec to 60min:00sec respectively.

  • Page 65: How To Backup The Footage Step-By-Step

    Step 3. Channel Selection. Check on the channels you wish to playback, and then click PLAY. 12.2 How to backup the footage step-by-step? Step 1. Click the BACKUP button There are two ways to enter the BACKUP menu. Option 1: Click the right button of the mouse to open the quick menu bar, and press the “BACKUP”...
  • Page 66 Step 3. Select channels to backup. 3.1 Double click the event to preview the footage before backup. 3.2 Select the events you wish to backup by marking on “BAK” check box. 3.4 Click the backup button to storage device page. Record Backup Select Check Back Up...

  • Page 67: How To Setup The Network Step By Step

    Step 5. Start Backup the file. Once you click the “BACKUP” button, the DVR will start to backup. When the processing bar reaches to 100%, the backup process is completed. 12.3 How to setup the Network step by step? Decide your network environment In Network setting, you can choose the connection type from Static, DHCP, or PPPoE(which allow you to dial up by ADSL modem or 3G dongle).

  • Page 68: Static

    12.3.1 Static Each network device has its own IP address. An IP address is like a doorplate of the device, helping data to be delivered to the correct destination. An IPv4 address contains 32 bits, which are divided into four parts, each part separated by a dot, such as 255.255.255.0.
  • Page 69 Step 1: Set your DVR network mode to static mode 1. Change the connection type to “STATIC” in DVR’s network setting 2. Assign the IP address to the DVR Note: Be sure not to set up a duplicated IP address for the DVR. For example, if you assign 192.168.0.100 to the PC, please change the IP address of the DVR to 192.168.0.101 3.
  • Page 70 Find “Internet Protocol (TCP/IP)” and click the “Properties” to enter the setting menu In the following menu, choose “Use the following IP address” to set up IP address manually 1) Enter the IP address for your PC. Be sure not to set up a duplicated IP address with any other network devices.
  • Page 71 For WINDOW 7 StartControl PanelView network status and tasksclick and enter the next menu Click “Change adapter settings” at the left column  ...
  • Page 72 Find the network adapter and right click the mouse button and click the “Properties” to enter the setting menu Find Internet Protocol Version 4(TCP/IPv4) and click “Properties” In the following menu, choose “Use the following IP address” to set up IP address manually  ...

  • Page 73: Dhcp

    1) Enter the IP address for your PC. Be sure not to set up a duplicated IP address with any other network devices. 2) Enter Subnet mask address. This address should correspond to the Netmask address of your DVR. 3) Enter Default gateway address. This address should correspond to the Gateway address of your DVR.
  • Page 74 DHCP connection through Router/Server (Corporation) Here is an example of how to set up connection between the DVR and your PC in DHCP mode For details, please consult your MIS staff Step 1: Set up your router/DHCP server. or check the manual of the router.  ...
  • Page 75 Find your network adaptor and click the right button and choose “Properties” Find “Internet Protocol (TCP/IP)” and click the “Properties” to enter the setting menu In the following menu, choose “Obtain an IP address automatically”  ...
  • Page 76 For WINDOW 7 StartControl PanelView network status and tasksclick and enter the next menu Click “Change adapter settings” at the left column  ...
  • Page 77 Find the network adapter and right click the mouse button and click the “Properties” to enter the setting menu Find “Internet Protocol Version 4(TCP/IPv4)” and click “Properties”  ...

  • Page 78: Pppoe

    In the following menu, choose “Obtain an IP address automatically” If the router/DHCP server is set correctly, you should be able to connect to DVR from your PC successfully. Note: The IP address assigned to DVR would be varied when the router restarts or after a period of time.
  • Page 79 Step 1: In Network setting menu, set the mode to “STATIC” and click the “PPPOE” to enter the setting menu. Step 2: In PPPoE/3G setting menu, set the mode to “PPPoE” and choose “ON” to enable it. Note: for account and password information, please check with your internet service provider.

  • Page 80: How To Set Up A 3G Connection For Your Dvr

    12.3.4 How to set up a 3G connection for your DVR? (Note: for supported USB 3G dongle, please check with the manufacturer for latest information) Step 1: In Network setting menu, set the mode to “STATIC” and click the “PPPOE” to enter the setting menu.

  • Page 81: Email Setup

    12.4 Email Setup In DVR, you can set up an email reminder for situations like motion, alarm, etc. In the following section, we will illustrate how to set it up by using Gmail. Step 1: In Network setting menu, click on “E-MAIL SETUP” and enter the following menu Step 2: Enable the email function by choosing “ON”...

  • Page 82: Ddns Setup

    12.5 DDNS Setup DDNS: (Dynamic DNS). It is an service to provide the updating in real time of Internet Domain Name System (DNS) name servers to keep up to date the active DNS configuration of their configured hostnames, addresses and other information. In DVR, you can apply a DDNS service for a dynamic IP address.
  • Page 83 Below we will explain how to apply a DDNS service through Dyndns 1. Go to http://www.dyndns.com 2. Click on Dyndns standard to apply a dyndns account  ...
  • Page 84 3. Press on “ORDER NOW” to start applying  ...
  • Page 85 4. Select your wanted Hostname for your DVR Input your wanted hostname for your DVR Note: If you are using firewall or router to connect DVR, please set the DDNS setting in FW/router, then use port forwarding in order to connect 5.
  • Page 86 6. If you have never applied Dyndns service before, please create a new account first. 7. When finished, press “create account” to proceed.  ...
  • Page 87 8. System will send you an email for confirmation. Please go to your email box and see if you have received it. There will be a link for you to confirm the application. 9. Go to your DVR to set the DDNS setting. (I use IE for demonstration but in the DVR OSD, you can find the same setting there).

  • Page 88: Default Setting

    Default Setting Item Default Setting Item Default Setting Channel Overwrite HDD Setup Resolution Normal Pack Time 60 Mins Frame Rate Real-time Date Format YY/MM/DD Record Quality Highest Time Format 24 Hours Setup Time Setup Audio Disable Time Zone GMT+08:00 Schedule Always Daylight Saving Channel 1...

  • Page 89: Hdd Support List

    HDD Support List Suggest to install the Hard Driver listed below to make sure the compatibility. Brand Model Number Capacity ST3250310CS 250G ST3320410SV 320G ST3500418AS 500G ST3500312CS 500G SEAGATE ST3750528AS 750G ST31000424CS ST31500541AS 1.5T ST32000542AS HCT721025SLA380 250G HCT721032SLA380 320G HITACHI HCP725050GLA380 500G HCT721010SLA360...

  • Page 90: Operation System For Mobile Phone Application

    Operation System For Mobile Phone Application Version Mobile Phone Software Android 2.1, 2.2, 2.3 Castillo Player+.apk iPhone 3.x, 4.x CastilloPlayer+ WinMobile 6.5.x CastilloPlayer_5.0.3.CAB Symbian S60 v3 above CastilloPlayer_5.1.713.sisx Support RTSP BlackBerry None Protocol 3G Data Rate Data Transfer Speed (bps) Support Verified Brand Model...
  • Page 91    ...

Table of Contents