Installing Pcie Solid State Drive (Ssd); System Fan; Removing System Fan - Dell Latitude 12 7212 Owner's Manual

CAUTION:

Installing PCIe Solid State Drive (SSD)

1 Slide and insert the SSD module in the connector on the system board.
NOTE: Ensure that the IC on the SSD module is positioned upward in the connector on the system board. Do ensure to
insert the SSD module by an angle not more than 30° to 35°.
2 Replace the screw (1) to secure the SSD module to the tablet chassis.
3 Install the:
a Heat sink
b Display assembly
c Battery
4 Follow the procedure in

System fan

Removing system fan

1 Follow the procedure in
2 Remove the:
Lift the SSD card by the side. DO NOT touch the circuit.
After working inside your computer.
Before working inside your computer.
Removing and installing components 35