NOTE:
g Insert the plastic scribe near the system fan screw slot, and slide to release and lift the system board from the tablet chassis [2].
Installing system board
1
Align the system board with the screw holes on the tablet chassis.
2
Replace the screws (6) to secure the system board to the tablet chassis.
3
Connect the back camera cable, front camera cable, fingerprint reader cable, battery connector cables on the system board.
CAUTION:
Connect the cables to respective slot that were disconnected while removing the system board. See
removing system
4
Install the:
a
WWAN
b
WLAN
c
System fan
d
Heat sink
e
Display assembly
f
Battery
5
Follow the procedure in
Ensure to lift the system board prior to all connected cables are removed.
board.
After working inside your
computer.
Removing and installing components
43