Removing And Installing Components; Removing The Battery - Dell Latitude 12 Rugged 7202 Getting Started Manual

Hide thumbs Also See for Latitude 12 Rugged 7202:
Table of Contents

Advertisement

Removing and Installing
Components
This section provides detailed information on how to remove or install the components
from your computer.

Removing the Battery

WARNING: Using an incompatible battery may increase the risk of fire or
explosion. Replace the battery only with a compatible battery purchased from Dell.
The battery is designed to work with your Dell tablet. Do not use a battery from any
other tablet with your tablet.
WARNING: Before removing or replacing the battery, turn off the tablet,
disconnect the AC adapter from the electrical outlet and the tablet, disconnect the
modem from the wall connector and tablet, and remove any other external cables
from the tablet.
WARNING: Not for use in hazardous locations. See installation instructions.
1.
To remove the battery:
a. Unlock the battery release latch by sliding towards the battery.
b. Push the button in a downward direction to unlatch the battery bay.
4
11

Advertisement

Table of Contents
loading

Table of Contents