Table of Contents
Advertisement
Option
Description
•
Password Change
Allows you to enable or disable permission to the System and Hard Drive passwords when the admin password is
set.
Allow Non-Admin Password Changes This option is selected by default.
Non-Admin Setup
Allows you to determine whether changes to the setup options are allowed when an administrator password is set.
Changes
If disabled the setup options are locked by the admin password.
UEFI Capsule
This option controls whether the system allows BIOS updates via UEFI capsule update packages.
Firmware Updates
Enable UEFI Capsule Firmware Updates option is selected by default.
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST.
You can control whether the trusted platform module is visible to the operating system. The option is:
•
•
•
•
•
•
•
Computrace (R)
Allows you to activate or disable the optional Computrace Service from Absolute software. The options are:
•
•
•
Default setting: Activate
OROM Keyboard
Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The options
Access
are:
•
•
•
Default setting: Enable
62
System setup
Reboot bypass
NOTE:
Disabling this option will block BIOS updates from services such as Microsoft Windows Update
and Linux Vendor Firmware Service (LVFS).
TPM on This option is selected by default.
Clear
PPI Bypass for Enable Commands This option is selected by default.
Attestation Enable. This option is selected by default.
PPI Bypass for Disable Commands
Key Storage Enable. This option is selected by default.
SHA-256. This option is selected by default.
CAUTION:
For the TPM upgrade/downgrade process, it is recommended to complete the process in an
AC power with AC adapter plugged into the computer. The upgrade/downgrade process without the AC
adapter plugged in might damage the computer or hard disk.
NOTE:
Disabling this option does not change any settings you have made to the TPM, nor does it
delete or change any information or keys you may have stored in the TPM. Changes to this setting take
effect immediately.
Deactivate
Disable
Activate
NOTE:
The Activate and Disable options will permanently activate or disable the feature and no further
changes will be allowed
Enabled. This option is selected by default.
One Time Enable
Disabled
Advertisement
Table of Contents
Troubleshooting
