Stylus; Removing Stylus; Installing Stylus - Dell Latitude 12 7212 Owner's Manual

10 Install the:
a Battery
11 Follow the procedure in

Stylus

Removing stylus

1 Follow the procedure in
2 Locate the stylus at the top of the tablet.
3 Pull the stylus by the thread upward.
NOTE: Avoid pulling the stylus attached with the stretchable thread.
4 Pull the stylus from the groove on the tablet.
NOTE: Pull the stylus until the tip of the pen is visible at the mouth of the groove.
The stylus is ready to assist you in using the rugged tablet.
For more details, see Getting the stylus ready for use

Installing stylus

1 Align the stylus with the groove on the tablet.
2 Push and smoothly slide it inside to secure the stylus.
NOTE: Avoid hanging the stylus detached from its groove when not in use.
18 Removing and installing components
After working inside your computer.
Before working inside your computer.