Solid-State Drive - Dell Latitude 7220EX Service Manual

Steps
1. Align the screws on the system fan with the screw holes on the system board.
2. Replace the four (M2x5) screws to secure the system fan to the chassis.
3. Connect the system fan cable to the connector on the system board.
4. Route the system fan cable through the routing guide on the system fan.
Next steps
1. Install the SSD heat-sink.
2. Install the display assembly.
3. Install the stylus.
4. Install the batteries.
5. Install the system cover.
6. Install the battery cover
7. Follow the procedure in

Solid-state drive

Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in
42 Field service information
assembly.
after working inside the tablet.
before working inside the tablet.