Installation; Information On Transport; Stacking; Overhead Installation - Omnitronic PAS-212PRO-A User Manual

5

INSTALLATION

The speaker system can be set up as desired. The location must be solid, plane, anti-slip, vibration-free,
oscillation-free, and fire-resistant. The installation area must hold a minimum point load of 5 times the
system's load (e.g. weight 20 kg - point load 100 kg). The speaker system must never be installed higher
than 100 cm without secondary attachment.

Information on Transport

For transport, the speaker system features two carrying handles. The speaker system should be carried
without force by two persons of the same size. Carrying the speaker system as one person alone should be
avoided as the high weight and the strain could lead to back damages and torsions. Please note that all
speaker systems with more than 25 kg weight must be transported with two persons.

Stacking

This speaker system may only be installed on top of another speaker system if both systems are lashed up
with each other via appropriate clamping belts and protected against flipping over.

Overhead Installation

Please consider the valid standards and national regulation during the installation!
The installation must only be carried out by an authorized dealer!
Before taking into operation for the first time, the installation has to be approved by an expert!
If this speaker system will be installed in a mounting height higher than 1 meter (e.g. on the stage, on a
stage element or on a framework) we speak of overhead installation. For overhead installation, the speaker
system must always be secured with an appropriate secondary attachment. The speaker system should be
installed outside areas where persons may walk by or be seated. The speaker system has to be installed out
of the reach of people.
Speaker systems in overhead installations may cause severe injuries when crashing down! If you have
doubts concerning the safety of a possible installation, do NOT install the speaker system!
The installation of the speaker system has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the speaker system staying in the area below the installation place, on
bridges, under high working places and other endangered areas is forbidden.
The operator has to make sure that:
-safety-relating and machine-technical installations are approved by an expert before taking into operation
for the first time and after changes before taking into operation another time.
- safety-relating and machine-technical installations are approved by an expert after every four year in the
course of an acceptance test.
- safety-relating and machine-technical installations are approved by a skilled person once a year.
DANGER TO LIFE!
DANGER TO LIFE!
21